![]() Note: Use the Command Lookup Tool (registered customers only) to obtain more information on the commands used in this section. Configure In this section, you are presented with the information to configure the features described in this document. Conventions Refer to the Cisco Technical Tips Conventions for more information on document conventions. If your network is live, make sure that you understand the potential impact of any command. All of the devices used in this document started with a cleared (default) configuration. Cisco VPN Client Version 4.x Note: This document was recertified with a Cisco 3640 Router with Cisco IOS Software Release 12.4(8).ΔΆ The information in this document was created from the devices in a specific lab environment. Cisco IOS Software Release 12.3(6) on the remote EzVPN server router (this can be any crypto version that supports the EzVPN server feature). Components Used The information in this document is based on these software and hardware versions: Cisco IOS Software Release 12.3(11)T on the EzVPN Client and server router. ![]() Prerequisites Requirements There are no specific requirements for this document. For a sample configuration on EzVPN between a Cisco 871 router and a Cisco 7200VXR Router with NEM Mode, refer to 7200 Easy VPN Server to 871 Easy VPN Remote Configuration Example. Refer to Configuring an IPsec Router Dynamic LAN to LAN Peer and VPN Clients in order to learn more about the scenario where there is a LAN to LAN configuration between two routers in a hub spoke environment with Cisco VPN Clients also connect to the hub and Extended Authentication (XAUTH) is used. Traffic can be routed from a VPN Client to the EzVPN server, then back out to another remote EzVPN server. 1 IOS Router : Easy VPN (EzVPN) in Network Extension Mode (NEM) with Split tunnelling Configuration Example Document ID: Contents Introduction Prerequisites Requirements Components Used Conventions Configure Network Diagram Configurations VPN Client Configuration Verify and Troubleshoot Related Information Introduction This configuration details the new feature in Cisco IOS Software Release 12.3(11)T that enables you to configure a router as an EzVPN Client and server on the same interface.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |